Application of combined punching and shearing machine

Combined punching and shearing machines:

Machine features:

Punching capacity of 40 tonnes respectively, 45 tons and 60 tons;
Equipped with separate hydraulic station;
1. punch workspace
1) equipped with a wide variety of punching die to meet a variety of needs.
2) rapid removal of Red clamp system can greatly save time are to be replaced, and to maintain its accuracy.
3) special stripper plate, good perspective, security design, easy punching job.
4)-accessible Strip feeder baffles, suitable for punches of various sizes.
5) two-piece work plate with graduated scale and location, ease of operation.
2. flat shear zone
1) on the special curve designed blades, shear distortion to a minimum.
2) knife Board with four cutting blade can be replaced.
3) attached to the set gauge plate support, easy to adjust to the job.
4) diagonal edge part of the iron butt cut.
5) clamp easy to adjust and see the cut lines.
3. steel. square bar shearing workspace
1) same plate can be used for round, square steel shear.
4. angle iron shear zone
1) single blade cut, no loss of material, the deformation is slight.
2) 45/90 butt cut easy, beautiful and practical.
3) blade has 4 blade designs may be used, and affordable.
5. notching workspace
1) for flat, angle iron, such as the highest ideal, convenient docking point-cutting work.
2) attach electrical interlock safety cover, safe and easy.
3) attached to the position of bench ... easy positioning accurate processing.